Flexible Dockside Conveyors



BestFlex Power 1.5” Roller Series

The BestFlex 1.5 flexible power conveyor offers consistency in its high performance and quality for shipping or receiving hundreds to thousands of packages a day. The BestFlex 1.5 model has a maximum compaction ratio to take advantage of valuable floor space.

  • Load capacity 100 lbs/ft
  • Heavy duty 16 gauge precision bearing 1.9 diameter steel rollers
  • 5” axle centers
  • 31½” – 41½” adjustable conveyor heights
  • Heavy duty steel square tubing zinc plated legs offer longer service life and stability
  • 6” x 2” heavy duty casters with brakes
  • 1.59” aluminum extruded side plates with bolted construction
  • Self tracking design allows packages to follow the path of the conveyor without using engineered curves
  • Durable DC drive motors with 120VAC
  • On/off switches on both ends of conveyor
  • Handles on each end of the unit
  • 4” and 3” axle centers – to handle smaller packages
  • Electronic photo eye package stop – The conveyor stops when sensors at the end detect a package is present. This stops delicate packages from being driven into a fixed end and provides power saving control.
  • Zero pressure accumulation – Provides a zoned flow control only allowing each package to proceed when the downstream zone is empty. The addition of “time out” control gives excellent power saving only driving the conveyor as required.
  • Indexing – The leading edge of a package is detected and starts the conveyor which runs until the trailing edge is detected plus a pre-set time delay. The conveyor can be utilized as an end of line storage buffer.
  • Leg connect brackets
  • Electrical interface kit (allows multiple sections to operate together)
  • Herringbone Transition – assists in centering the cartons while providing a smooth transition from the feed conveyor down to the loader when used in shipping applications
  • Guide Track – assists the operator in extending and retracting the conveyor out from underneath the feed system when used in shipping applications
  • PowerTrax – primarily used to safely maneuver heavy conveyors into the nose and back out of trailers. It is ergonomically engineered to help operators move conveyor with minimal effort. It is used with our BestFlex power conveyors.

Conveyor width – 18”, 24” or 30” Conveyor length – Extended length 8’ to 60’ (other lengths are available upon request) Axle Center length – Length of package divided by 3 = recommended axle centers.

Package Size Axle Centers
15" 5"
12" 4"
9" 3"
18″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.51812 4′ -12′ 5
- BFP1.51824 8′ – 24′ 8
- BFP1.51836 11′ – 36′ 11
- BFP1.51848 14′ – 48′ 14
24″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.52412 4′ -12′ 5
- BFP1.52424 8′ – 24′ 8
- BFP1.52436 11′ – 36′ 11
- BFP1.52448 14′ – 48 14
30″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.53012 4′ -12′ 5
- BFP1.53024 8′ – 24′ 8
- BFP1.53036 11′ – 36′ 11
- BFP1.53048 14′ – 48′ 14
Contact Us