Flexible Dockside Conveyors



NestaFlex Gravity 200 RLS Roller Series

With its innovative design, the BestFlex 1.9″ power roller conveyor requires less storage space when fully retracted and can service multiple dock doors for maximum productivity.

  • Load capacity 100 lbs/ft
  • Heavy duty 16 gauge precision bearing 1.9 diameter steel rollers
  • 5” axle centers
  • 28” – 37½” adjustable conveyor heights using hand knobs to raise or lower the legs
  • Heavy duty steel square tubing zinc plated legs offer longer service life and stability
  • 8” x 2” heavy duty casters with brakes
  • 2” aluminum extruded side plates with bolted construction
  • Self tracking design allows packages to follow the path of the conveyor without using engineered curves
  • Durable DC drive motors with 120VAC
  • Variable speed 0-120 FPM
  • Operator controls – start/stop
  • On/off switches on both ends of conveyor
  • Handles on each end of the unit
  • 4” and 3” axle centers – to handle smaller packages
  • Electronic photo eye package stop – The conveyor stops when sensors at the end detect a package is present. This stops delicate packages from being driven into a fixed end and provides power saving control.
  • Zero pressure accumulation – Provides a zoned flow control only allowing each package to proceed when the downstream zone is empty. The addition of “time out” control gives excellent power saving only driving the conveyor as required.
  • Indexing – The leading edge of a package is detected and starts the conveyor which runs until the trailing edge is detected plus a pre-set time delay. The conveyor can be utilized as an end of line storage buffer.
  • Connect brackets
  • Electrical interface kit (allows multiple sections to operate together)
  • Herringbone Transition – assists in centering the cartons while providing a smooth transition from the feed conveyor down to the loader when used in shipping applications
  • Guide Track – assists the operator in extending and retracting the conveyor out from underneath the feed system when used in shipping applications
  • PowerTrax – primarily used to safely maneuver heavy conveyors into the nose and back out of trailers. It is ergonomically engineered to help operators move conveyor with minimal effort. It is used with our BestFlex power conveyors.

Conveyor width – 18”, 24” or 30” Conveyor length – Extended length 8’ to 60’ (other lengths are available upon request) Axle Center length – Length of package divided by 3 = recommended axle centers.

Package Size Axle Centers
15" 5"
12" 4"
9" 3"
18″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.91812 5′ -12′ 5
- BFP1.91824 10′ – 24′ 8
- BFP1.91836 15′ – 36′ 11
- BFP1.91848 20′ – 48′ 14
24″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.92412 5′ -12′ 5
- BFP1.92424 10′ – 24′ 8
- BFP1.92436 15′ – 36′ 11
- BFP1.92448 20′ – 48 14
30″ Wide Model Number Standard Lengths Contracted – Extended Leg Set Per Unit
- BFP1.93012 5′ -12′ 5
- BFP1.93024 10′ – 24′ 8
- BFP1.93036 15′ – 36′ 11
- BFP1.93048 20′ – 48′ 14
Contact Us